DONGDE YUNHAIAlicat Flow Instrument Specialists
Series

PF series gas mass flow controllers

The same measuring element with an integral closed-loop control valve, so the unit holds a setpoint rather than only reporting flow. Setpoint can be driven by analog signal, serial or fieldbus.

Request a quotation
11 models in this series. Click any model for its own page with the full specification and sizing notes. Values are quoted from manufacturer documentation; the figures confirmed on your quotation prevail.
ModelTypeFull-scale rangeProcess connectionPressure drop
(air to atmosphere)
Operating pressure
PF-1000SLPM-DGas mass flow controller0 – 1000 SLPM3/4" NPT female14.0 PSID11.5 – 160 PSIA
PF-100SCCM-DGas mass flow controller0 – 100 SCCM1/8" NPT female1.0 PSID11.5 – 160 PSIA
PF-100SLPM-DGas mass flow controller0 – 100 SLPM1/4" NPT female15.5 PSID11.5 – 160 PSIA
PF-10SLPM-DGas mass flow controller0 – 10 SLPM1/8" NPT female5.5 PSID11.5 – 160 PSIA
PF-1SLPM-DGas mass flow controller0 – 1 SLPM1/8" NPT female1.5 PSID11.5 – 160 PSIA
PF-200SLPM-DGas mass flow controller0 – 200 SLPM——11.5 – 160 PSIA
PF-20SLPM-DGas mass flow controller0 – 20 SLPM1/8" NPT female12.0 PSID11.5 – 160 PSIA
PF-2SLPM-DGas mass flow controller0 – 2 SLPM1/8" NPT female3.0 PSID11.5 – 160 PSIA
PF-500SCCM-DGas mass flow controller0 – 500 SCCM1/8" NPT female1.0 PSID11.5 – 160 PSIA
PF-500SLPM-DGas mass flow controller0 – 500 SLPM3/4" NPT female6.5 PSID11.5 – 160 PSIA
PF-5SLPM-DGas mass flow controller0 – 5 SLPM1/8" NPT female2.0 PSID11.5 – 160 PSIA

Choosing within this series

As a rule of thumb, size the instrument so your working flow falls between roughly 30% and 90% of full scale — well above the bottom of the range, where resolution is poor, and below the top, where the pressure drop figure quoted here applies. Instrument calibration is gas-specific: tell us the gas you are metering and we will confirm whether the published range applies directly or needs a correction.

Models in this series: PF-1000SLPM-D, PF-100SCCM-D, PF-100SLPM-D, PF-10SLPM-D, PF-1SLPM-D, PF-200SLPM-D, PF-20SLPM-D, PF-2SLPM-D, PF-500SCCM-D, PF-500SLPM-D, PF-5SLPM-D.

Back to the full 37-model range

Not sure which range you need?

Tell us the gas, the flow you need to control or measure, and the pressures either side of the instrument. We will size it and quote it.

Request a quotation