DONGDE YUNHAIAlicat Flow Instrument Specialists
Series

PZ / PFZ low-pressure-drop meters

Reduced-restriction versions for near-atmospheric processes where the pressure drop of a standard element would disturb the system. Maximum line pressure 60 PSIA.

Request a quotation
3 models in this series. Click any model for its own page with the full specification and sizing notes. Values are quoted from manufacturer documentation; the figures confirmed on your quotation prevail.
ModelTypeFull-scale rangeProcess connectionPressure drop
(air to atmosphere)
Operating pressure
PFZ-10SLPM-DLow-pressure-drop gas mass flow controller0 – 10 SLPM——Max. 60 PSIA
PFZ-2SLPM-DLow-pressure-drop gas mass flow controller0 – 2 SLPM——Max. 60 PSIA
PZ-5SLPM-DLow-pressure-drop gas mass flow meter0 – 5 SLPM——Max. 60 PSIA

Choosing within this series

As a rule of thumb, size the instrument so your working flow falls between roughly 30% and 90% of full scale — well above the bottom of the range, where resolution is poor, and below the top, where the pressure drop figure quoted here applies. Instrument calibration is gas-specific: tell us the gas you are metering and we will confirm whether the published range applies directly or needs a correction.

Models in this series: PFZ-10SLPM-D, PFZ-2SLPM-D, PZ-5SLPM-D.

Back to the full 37-model range

Not sure which range you need?

Tell us the gas, the flow you need to control or measure, and the pressures either side of the instrument. We will size it and quote it.

Request a quotation