DONGDE YUNHAIAlicat Flow Instrument Specialists
PZ / PFZ low-pressure-drop meters

PFZ-2SLPM-D
Low-pressure-drop gas mass flow controller — 0 – 2 SLPM

PFZ-2SLPM-D is a low-pressure-drop gas mass flow controller covering 0 – 2 SLPM, with — process connections, — pressure drop at full scale and an operating pressure range of Max. 60 PSIA.

Request a quotation

Specification

ModelPFZ-2SLPM-D
TypeLow-pressure-drop gas mass flow controller
Full-scale range0 – 2 SLPM
Process connection—
Pressure drop (air to atmosphere, full scale)—
Operating pressureMax. 60 PSIA

What this range covers

bench-scale duty — laboratory reactors, cell-culture gas overlay, analytical instruments and gas-mixing panels where the working flow sits in the single-digit to twenty-litre band.

Pressure drop for this unit is not published in the range table — confirm it against your line pressure before ordering; on low-range units the restriction is what decides whether the meter will work on your supply.

As a rule of thumb, size the instrument so your working flow falls between roughly 30% and 90% of full scale — well above the bottom of the range, where resolution is poor, and below the top, where the pressure drop figure quoted here applies. Instrument calibration is gas-specific: tell us the gas you are metering and we will confirm whether the published range applies directly or needs a correction.

Before you order — three things to confirm

  1. The gas. Calibration follows the gas you name. Reactive, corrosive or gas-mixture duty may need different wetted materials and seals — tell us the composition.
  2. The pressures either side. The pressure-drop column is measured to atmosphere at full scale. If your downstream pressure is above atmosphere, the usable span shifts; give us upstream and downstream pressure and we will confirm whether PFZ-2SLPM-D still fits.
  3. The connection. This unit is supplied with —. Check your mating fitting and tube size before ordering — an adaptor changes both the dead volume and the effective restriction on low-range units.

Other models in the PZ / PFZ low-pressure-drop meters

ModelTypeFull-scale rangeProcess connectionPressure dropOperating pressure
PFZ-10SLPM-DLow-pressure-drop gas mass flow controller0 – 10 SLPM——Max. 60 PSIA
PZ-5SLPM-DLow-pressure-drop gas mass flow meter0 – 5 SLPM——Max. 60 PSIA

See the full PZ / PFZ low-pressure-drop meters table or compare all 37 ranges.

Need this model quoted?

Send the gas, the flow you need to measure or control, and the pressures either side of the instrument. We will confirm the range and quote it — normally the same working day.

Request a quotation