DONGDE YUNHAIAlicat Flow Instrument Specialists
Series

PFT high-pressure controllers

Controllers built for gas bottle, reactor and pilot-plant duty at elevated line pressure, up to 320 PSIA.

Request a quotation
1 models in this series. Click any model for its own page with the full specification and sizing notes. Values are quoted from manufacturer documentation; the figures confirmed on your quotation prevail.
ModelTypeFull-scale rangeProcess connectionPressure drop
(air to atmosphere)
Operating pressure
PFT-50SLPM-DHigh-pressure gas mass flow controller0 – 50 SLPM——11.5 – 320 PSIA

Choosing within this series

As a rule of thumb, size the instrument so your working flow falls between roughly 30% and 90% of full scale — well above the bottom of the range, where resolution is poor, and below the top, where the pressure drop figure quoted here applies. Instrument calibration is gas-specific: tell us the gas you are metering and we will confirm whether the published range applies directly or needs a correction.

Models in this series: PFT-50SLPM-D.

Back to the full 37-model range

Not sure which range you need?

Tell us the gas, the flow you need to control or measure, and the pressures either side of the instrument. We will size it and quote it.

Request a quotation