DONGDE YUNHAIAlicat Flow Instrument Specialists
Series

PE series portable flow meters

Battery-powered field units for verifying flow on lines that are already installed and running — no permanent installation, no break in the process.

Request a quotation
7 models in this series. Click any model for its own page with the full specification and sizing notes. Values are quoted from manufacturer documentation; the figures confirmed on your quotation prevail.
ModelTypeFull-scale rangeProcess connectionPressure drop
(air to atmosphere)
Operating pressure
PE-100SCCM-DPortable gas mass flow meter0 – 100 SCCM1/8" NPT female (100 SCCM–20 SLPM)1.0 PSID11.5 – 160 PSIA
PE-100SLPM-DPortable gas mass flow meter0 – 100 SLPM1/8" NPT female (100 SCCM–20 SLPM)2.5 PSID11.5 – 160 PSIA
PE-10SLPM-DPortable gas mass flow meter0 – 10 SLPM1/8" NPT female (100 SCCM–20 SLPM)1.0 PSID11.5 – 160 PSIA
PE-1SLPM-DPortable gas mass flow meter0 – 1 SLPM1/8" NPT female (100 SCCM–20 SLPM)1.0 PSID11.5 – 160 PSIA
PE-20SLPM-DPortable gas mass flow meter0 – 20 SLPM1/8" NPT female (100 SCCM–20 SLPM)1.0 PSID11.5 – 160 PSIA
PE-500SCCM-DPortable gas mass flow meter0 – 500 SCCM1/8" NPT female (100 SCCM–20 SLPM)1.0 PSID11.5 – 160 PSIA
PE-5SLPM-DPortable gas mass flow meter0 – 5 SLPM1/8" NPT female (100 SCCM–20 SLPM)1.0 PSID11.5 – 160 PSIA

Choosing within this series

As a rule of thumb, size the instrument so your working flow falls between roughly 30% and 90% of full scale — well above the bottom of the range, where resolution is poor, and below the top, where the pressure drop figure quoted here applies. Instrument calibration is gas-specific: tell us the gas you are metering and we will confirm whether the published range applies directly or needs a correction.

Models in this series: PE-100SCCM-D, PE-100SLPM-D, PE-10SLPM-D, PE-1SLPM-D, PE-20SLPM-D, PE-500SCCM-D, PE-5SLPM-D.

Back to the full 37-model range

Not sure which range you need?

Tell us the gas, the flow you need to control or measure, and the pressures either side of the instrument. We will size it and quote it.

Request a quotation